Macpower Alumni Bedienerhandbuch PDF herunterladen (Seite 47)

SVAT ELECTRONICS

now you can see

CLEARVU11

CONNECTING THE DVR USING A D-LINK ROUTER (EXAMPLE)

In this example a D-Link D1-604 router was used. The steps for your router may be similar to the following steps.

These instructions have also been created without a rewall in place. If you have a rewall, please consult a computer

technician or your network administrator.

You need to congure the router to forward the port numbers that the DVR uses. This will allow a computer over the internet

to properly communicate with the DVR. The CLEARVU11 by default uses ports 67, 68, 80. All 3 ports need to be congured.

1. Open your web browser. Enter the ROUTER IP

address (default gateway) in the address bar and

press ENTER.

2. Enter the user name “admin”. Leave the password

blank followed by pressing the OK button (unless

you have set up a user name and password for your

router).

In this situation, our router username is “admin” and the password is blank. Your router’s default username and

password can be found by visiting

www.portfoward.com and following the steps outlined in “Conguring Your Router.”

*If the default username and password are not working, contact your network administrator (or the person who

congured your router.)

* It is necessary to log on to your router to congure the port forwarding and access your DVR remotely.

3. Select the Advanced tab.

NETWORKING GUIDE

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 73 74

Keine Kommentare

Macpower Alumni Bedienerhandbuch Seite 47